Search results for "Manufacturing process"
showing 10 items of 41 documents
Key factors towards a high-quality additive manufacturing process with ABS material
2019
Abstract Additive Manufacturing technologies have gained a lot of popularity during the past years. The current challenge being the transition of this manufacturing technology from prototype oriented towards mass production. In order to achieve this, fabrication times and mechanical parameters must be improved. This paper aims to identify which are the parameters that have the highest influence on parts obtained with fused deposition modeling (FDM) technology from ABS material. In addition, this study identifies which are the most accurate methods to test the mechanical properties of FDM parts while still respecting ASTM standard for testing the tensile properties of plastics. It was found …
Cold gas dynamic spray additive manufacturing today: Deposit possibilities, technological solutions and viable applications
2017
This paper reports the current potentials of cold gas dynamic spraying (CGDS). CGDS has been significantly developed to produce several functional solutions categorized as follows: deposits with a single powder nature, composites-based deposits, nanotechnological deposits and hybrid coating/substrate assemblies. CGDS process has improved in proficiency and is still gaining attention from scientists and industry. Covering a wide range of materials, both standard and advanced, this additive manufacturing process offers substantial applications for surface functionalization, structural or dimensional restoration, bulk production providing specific material properties, and art/decoration. Progr…
Copper quality and sources in Middle Bronze Age I Byblos and Tell Arqa (Lebanon)
2013
Abstract Forty-four Middle Bronze Age I weapons discovered at the sites of Byblos and Tell Arqa in Lebanon were investigated in order to study their copper quality and provenance. The evaluation of copper qualities is based on quantifying permanent inclusions such as copper sulfide and lead globules. The provenance of copper was studied using lead isotope analyses. For further discrimination between copper groups and sources elemental analyses by PIXE were performed on some of the weapons investigated. The results revealed two copper groups that could be qualified as “dirty” copper and “clean” copper. The former was used in most of the weapon types whereas the latter was reserved for items …
Model-based Engineering for the Integration of Manufacturing Systems with Advanced Analytics
2016
To employ data analytics effectively and efficiently on manufacturing systems, engineers and data scientists need to collaborate closely to bring their domain knowledge together. In this paper, we introduce a domain-specific modeling approach to integrate a manufacturing system model with advanced analytics, in particular neural networks, to model predictions. Our approach combines a set of meta-models and transformation rules based on the domain knowledge of manufacturing engineers and data scientists. Our approach uses a model of a manufacturing process and its associated data as inputs, and generates a trained neural network model as an output to predict a quantity of interest. This pape…
An in vitro cyclic fatigue resistance comparison of conventional and new generation nickel-titanium rotary files
2018
Background New designs and processing of Niquel-Titanium (NiTi) have been introduced to increase resistance to cyclic fatigue. The purpose of this study was to compare the cyclic fatigue resistance of 3 NiTi rotary instruments, ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), Profile Vortex Blue (PVB; Dentsply Tulsa Dental, Tulsa, OK, USA) and ProTaper Universal (PTU; Dentsply Maillefer, Ballaigues, Switzerland). Material and Methods A cyclic fatigue test was conducted operating instruments from ProTaper Next X2, Profile Vortex Blue 25.06 and ProTaper F2. A total of 234 instruments were rotated in 2 simulated stainless steel curved canals with different angles of curvature …
Recombinant factor VIII: past, present and future of treatment of hemophilia A.
2018
The development of recombinant factor VIII (rFVIII) was initially driven by the necessity to treat hemophilia A (HA) patients with FVIII concentrates without the risk of transmitting infectious agents. Over the last three decades the safety of rFVIII has been further improved by completely removing animal or human proteins from the manufacturing process, so that patients would not be exposed to known or emerging pathogens. Recent efforts have concentrated on improving the expression of rFVIII, reducing its immunogenicity and enhancing its pharmacokinetic (PK) behavior. These new goals have been possible thanks to the develop-ment of biotechnology and a better knowledge of the function and s…
Special Issue of Journal of Manufacturing Processes on Advancing Manufacturing Processes Research at NAMRC 46
2018
During the refereeing process of papers submitted to NAMRC 46 this year, nine high-quality papers have been selected and fast-tracked to a special issue of Journal of Manufacturing Processes (JMP) entitled “Advancing Manufacturing Processes Research at NAMRC 46”. The selection of the fast-track papers was based on authors’ preferences, quality of the papers, reviewers’ recommendations, Track Chairs’ picks, pre-selection by the Chair of NAMRI/SME Scientific Committee, and final approval by the JMP Editor. The nine papers published in JMP are therefore excluded from the Proceedings of NAMRC 46 in Procedia Manufacturing. Nevertheless, these papers are presented in person at NAMRC 46. Details o…
Special Issue of Journal of Manufacturing Processes on New Trends in Manufacturing Processes Research
2019
Special issue of journal of manufacturing processes on new trends in manufacturing processes research
Influence of regionality and maturation time on the chemical fingerprint of whisky.
2020
International audience; Understanding the chemical composition of whisky and the impact of each step in the manufacturing process provides a basis for responding to the challenges of producing high quality spirits. In this study, the objective was to discriminate whiskies according to their geographical origin and authenticate the maturation time in cask based on the non-volatile profiles. The combination of FT-ICR-MS and chemometrics allowed the distinction of whiskies from four geographical origins in Scotland (Highlands, Lowlands, Speyside and Islay). Statistical modeling was also used to discriminate whiskies according to the maturation time in cask and reveal chemical markers associate…
The effects of lasers on bond strength to ceramic materials: A systematic review and meta-analysis
2018
Lasers have recently been introduced as an alternative means of conditioning dental ceramic surfaces in order to enhance their adhesive strength to cements and other materials. The present systematic review and meta-analysis aimed to review and quantitatively analyze the available literature in order to determine which bond protocols and laser types are the most effective. A search was conducted in the Pubmed, Embase and Scopus databases for papers published up to April 2017. PRISMA guidelines for systematic review and meta-analysis were followed. Fifty-two papers were eligible for inclusion in the review. Twenty-five studies were synthesized quantitatively. Lasers were found to increase bo…